13
8. BUILT-IN DATA MODE SWITCH
This dipswitch is used to set the data parameters for the built-in PTZ/DATA I/O Channel.
9. AUX I/O 1 CONNECTOR
This is the connector for Option Module position 1. Refer to the separate Option Module Manual included with
your shipment for details on connections to the Option Modules.
10. AUX I/O 2 CONNECTOR
This is the connector for Option Module position 2. Refer to the separate Option Module Manual included with
your shipment for details on connections to the Option Modules.
11. BUILT-IN DATA CHANNEL CONNECTOR
This is the built-in PTZ/Data I/O connector.
12. VIDEO OUTPUT CONNECTOR
This BNC connector is the output for the video signal.
13. IEC LASER WARNING LABEL
Refer to the Safety Instructions at the beginning of this manual.
14. REGULATORY COMPLIANCE LABEL
(Located on the side of the unit.)
15. VIDEO SYNC INDICATOR
This LED position is not installed on this unit and is, therefore, inoperative.
