Optelec
ClearReader
+
English
58
If the ClearReader
+
does not read the whole line of a document / column / table.
The automatic column recognition may be on. Press and hold the Scan button for 2
seconds to disable the column recognition and to switch to “TableMode”.
If the ClearReader
+
does not respond to the Scan button.
Open the camera arm and try it again.
If the Scan button still does not respond, check if the unit is powered.
If the ClearReader
+
does not respond to any button.
Make sure the battery is not empty. If the battery is empty, connect the power supply to
charge the battery.