7
Maintenance Troubleshooting
In the event that the device does not work correctly, correct the problem according to the following table before
contacting your authorized distributor
Suggested action:
If the device will not work at all
Make sure that the power cord is connected properly
Make sure that the cord of the power supply is connected properly. Make sure that the voltage applied to the power
outlet is within the specified range.
Contact STEREO OPTICAL or your authorized distributor if the above suggestions do not eliminate the corresponding
problem.
Cleaning
When the cover or panels of the device becomes soiled, wipe with a soft cloth. For stubborn soiling, immerse the cloth
in a neutral detergent diluted with water, and wipe. Finally wipe with a dry, soft cloth.
CAUTION
Never use an organic solvent such as paint thinner. The surface of the device may be damaged.
Never use a sponge or cloth containing excessive moisture to wipe the device. The water may leak into the inside of the
device and cause device malfunction.
- If the fixation lamps are smeared, proper measurements cannot be performed.
Specifications and Classifications
Classifications
This equipment has been evaluated to: ANSI/AAMI ES60601-1 (2005),
CAN/CSA-C22.2 No. 60601-1 (2008)
[Type of protection against electric shock]
The Optec 5000PG Vision Tester is classified as Class 1
A Class 1 is a device in which the protection against electric shock does not rely on basic insulation only, but which
includes an additional safety precaution in such a way that means are provided for the connection of the device to the
protective (ground) conductor in the fixed wiring of the installation in such a way that accessible metal parts cannot
become live in the event of a failure in the basic insulation.
7
Summary of Contents for 5000PG
Page 2: ...1 ...
Page 11: ...10 0 ...
