Support and Manuals
25 / 27
Enable Options
Specific CNC machines issue special “disable/enable” signals for turning the laser beam off and on.
The PLH3D-CNC Adapter can be set in such a way that the laser beam is enabled only for certain
states on two Enable inputs and disabled in other cases. A total of 12 distinct combinations of states
(called “Enable Options”) may be selected. This allows the PLH3D-CNC Adapter to connect with
virtually any machine.
Disabling affects the controlling signal only and does not cause the disarming of the laser head.
All 12 available options are listed below:
2. ANY means:
- lack of connection or any voltage in the 0 - 24 V range.
3. LOW means:
- either a DC voltage from 0 to +0.8 V,
- or a connection to GROUND through a 0 ... 1 kΩ resistance.
4. HIGH means:
- a connection to a DC voltage from +3 V to +24 V through a 0 ... 1 kΩ resistance.
5. TOGGLING means:
- LOW-to-HIGH or HIGH-to-LOW transitions, 200 ms or less apart.
Summary of Contents for PLH3D-6W-XF
