Oppo VS1000, User Manual

Page: 31 / 36

Useful notes
OTHERS
Troubleshooting
In order to prolong the service life of your player, it is recommended to wait at least 30 seconds
before you turn it on again after switching it off.
Turn off power after operation.
Some functions of the player may not be applicable to some discs.
Only use the power supply of the nominal voltage, otherwise the player will not be operational or
even be damaged.
In case of occasional player halt, please turn it off and turn it on again.
This player cannot play some Super VCD discs with the CVD format.
Please check for causes of problems in accordance with the following chart
before contacting any maintenance personnel.
Cause Correction
Symptom
No sound
No picture
No color
No disc reading
Remote control
failure
Temporary
function failure
Signal not properly connected.
Disc warped or dirty.
Player in mute status.
Signal not properly connected.
TV not set for proper system.
TV system not right.
TV set color not properly adjusted.
No disc in the player.
Disc not properly loaded.
Condensation on the laser head.
Mal-fabricated disc used.
Wrong buttons pressed.
Static leakage into the player from outside.
Connect signal securely.
Clean your disc.
Press MUTE button again.
Connect signal securely.
Reset the AV/TV status of your TV set.
Press P/N button on the remote control to set the system.
Readjust color of your TV set.
Load a disc.
Reload a disc, with the label side facing up.
Turn on the player, unload the disc and leave it on for about one hour.
Remote control not pointing to the sensor
window.
Remote control's operating distance more
than 8 meters away from your TV set.
Batteries low.
Use the remote control properly.
Replace both batteries.
Wait 5~10 seconds and the player will automatically return to normal.
Operate once more.
Turn off the player for 1 to 2 minutes, then turn it on again.
Picture rolling
TV set system not properly adjusted. Readjust system of your TV set.
28
No disc reading
Condensation on laser head
Disc reversely loaded
Disc not compatible
Power on and wait for 1-2 hours.
Make sure label side facing forward.
Make sure this player compatible with the loaded disc.
Sound distortion
Volume of the connected device too high Adjust volume of the device.
No subtitle
No subtitle made in disc
Subtitle of player turned off
TV clears subtitles
Disc problem
Press SUBTITLE button to select it
Adjust TV to make it display subtitles