22
FUNCTION SETUP
Speaker Setup
Speaker Setup Page
Downmix
Front Speaker
Center Speaker
Rear Speaker
Subwoofer
Channel Delay
Stereo
Large
Small
Small
On
1. Downmix Mode: To set this player's DOWNMIX
mode to change multi-channel audio into two
channel audio.
6. Channel Delay: To set delay time of the Center/
Surround/Subwoofer Speaker.
A. Press UP/DOWN navigation keys to select the
delay setting item. Press the SELECT navigation
key to enter the setting box.
B. Press UP/DOWN navigation keys to select the
desired item, then press LEFT/RIGHT navigation
keys to set the distance between the speaker and
listener.
C. After finishing setting, please press SELECT to exit.
Optional settings: LT/RT, Stereo, V SURR,
5.1CH.
Default: Stereo.
The 5.1CH mode needs disc's support. The number
of actual output channels depends on the played
disc.
NOTES
2. Front Speaker: To set the front speaker's
sound filtering control.
Optional settings: Large, Small.
Default: Large.
3. Center Speaker: To set the center speaker's
sound filtering control.
Optional Center/Rear Speaker settings: Large,
Small, OFF.
Default setting of Center/Rear speaker: Small.
Center and Rear are effective only when
DOWNMIX MODE is set to 5.1CH.
Optional settings: ON/OFF.
Default: ON.
4. Rear Speaker: To set the surround speaker's
sound filtering control.
5. Subwoofer: To open/close the bass speaker.
Audio Setup
1. EQ type: To set EQ modes.
Optional settings: None, Rock, Pop, Live,
Dance, Techno, Classic, Soft.
Default: None.
2. Sound Field
: To set different sound field
effects.
Optional settings: Off, Concert, Living Room,
Hall, Bathroom, Cave, Arena, Church.
Default: Off.
3. SPDIFO
utput: To set the bit stream type of
the digital output.
Optional settings: SPDIF/Raw, SPDIF/PCM.
Default: SPDIF/Raw.
4.
Out
LPCM
To set the output frequency of
the LPCM audio data to fit for different
power amplifiers.
Optional settings: 48K, 96K.
Default: 48K.
Audio Setup Page
EQ Type
Sound Field
SPDIF Output
LPCM Out
Tone control
PRO Logic
II
Dolby Digital Setup
Channel Trim
None
Off
Raw
48K
00
NOTE
The center/surround/subwoofer delay is effective
only for the corresponding speakers when the
delay is not set to OFF.
Sub
woofer
0cm
5. TONE control: This item is used to set the tone
level to match your diapason when you are singing.
Method to adjust tone:
A. Press UP/DOWN cursor button to select TONE item in
AUDIO SETUP PAGE, and then press SELECT button to
enter the adjust ment menu.
B. Press LEFT/RIGHT cursor button to adjust the
setting value.
C. Press SELECT button to return to AUDIO SETUP
PAGE after adjustment are well done.