S E T U P
M E N U
O P T I O N S
61
At level 7, the player applies the most aggressive CAR for very low quality video, and adds
Motion Adaptive VNR at level 8.
Remember that excessive noise reduction may cause a loss of details. We recommend using
the noise reduction function only when you encounter poorly encoded or compressed video that
has apparent noise artefacts.
For
HDMI 2
, the noise reduction level can be set between 0 and +3. The default is level 0. When
this level is increased, the player adjusts the picture quality by applying mosquito noise
reduction, random noise reduction and MPEG block noise reduction at the same time. The
higher the level, the more aggressive noise reduction functions apply.
The following picture adjustment controls are only available for
HDMI 1
video output:
8.
Colour Enhancement
: Allows you to adjust the colour enhancement level on the video output.
This enhances certain colours in the spectrum and enables vivid colours in outdoor scenes without
causing hue shifts, loss of detail or changes in skin tones.
9.
Contrast Enhancement
: Allows you to adjust the contrast enhancement level on the video
output. This expands detail in shadows.
HDMI Options
HDMI Options
is a sub-menu of the
Video Setup
menu. It allows you to configure some video settings that are
unique to the HDMI output. To enter this sub-menu, select
HDMI Options
from the
Video Setup
menu. To exit
this sub-menu, press the
RETURN
button or the
LEFT ARROW
key. The following HDMI options are available:
1.
Colour Space (HDMI 1)
– Allows you to select the colour space for the HDMI 1 output. The
available options are:
Auto
(recommended) – The player checks with the display device to automatically determine
what colour space to use. If the display device supports YCbCr 4:4:4, then it will be used to
avoid extra colour space conversion.
RGB Video Level
– The HDMI output uses RGB colour space and normal signal range
suitable for video displays.
RGB PC Level
– The HDMI output uses RGB colour space and expands the signal range.
The expanded signal range is suitable for personal computer (PC) displays. Some TVs are
designed to be used as a PC monitor, and expect signal in expanded RGB range when the
DVI input is selected. For these displays if the video signal uses the normal RGB range, the
black-white contrast will be reduced. You can set the player to use the RGB PC Level output
and restore proper contrast.
YCbCr 4:4:4
– The HDMI output uses YCbCr 4:4:4 colour space.
YCbCr 4:2:2
– The HDMI output uses YCbCr 4:2:2 colour space. Generally this is the colour
space that is closest to the colour space encoded on the discs. (All discs are encoded in
YCbCr 4:2:0 colour space, and the video decoder decodes it into YCbCr 4:2:2.)
2.
Colour Space (HDMI 2)
– Allows you to select the colour space for the HDMI 2 output. The
available options are the same as those for
Colour Space (HDMI 1)
.
3.
Deep Colour (HDMI 1)
– Allows you to select the Deep Colour mode for the HDMI 1 output. Deep
Colour is an option for some TVs or projectors that feature HDMI v1.3 or higher input. Normally,
each pixel of the video image is transmitted using 24-bit data (8-bit per channel for R, G, B or Y,
Cb, Cr). If Deep Colour is supported, each pixel of the video image can be transmitted using 30-bit
x
x
x
x
x
Summary of Contents for BDP-105AU
Page 1: ...USER MANUAL READ CAREFULLY BEFORE OPERATION Blu ray Disc Player BDP 105AU ...
Page 93: ...51976808 V1 5 ...
Page 94: ... ...
