Opitec 111.172, Instructions Manual

Page: 1 / 9

1
D111172#1
111.172
PARTS LIST
Quantity Size (mm) Description Part no.
Acrylic 1 100x65x12 Base,end part 1
Acrylic 1 50x50x5 Drive 2
Aluminium strip 1 250x10x2 Coil holder 3
Holed metal strip,5 holes 1 Coil holder 4
Copper wire 1 2400x0,6 Coil 5
Reed contact 1 20x2,5x0,6 Reed contact 6
Magnet 4 ø15x6 Magnet 7
Hex head machine screw 1 M6x25 Coil kern 8
Nuts 2 M6 Coil fixing 9
Nuts 3 M4 Axle fixing 10
Connection block 3 Reed contact 11
Machine screw 2 M4x16 End fixing 12
Machine screw 1 M4x30 Axle drive 13
Machine screw 2 M3x10 Holder 14
Brass bearing 1 ø5x15 Rotor bearing 15
Washer 1 ø9/4 Coil holder 16
Necessary tools:
Fretsaw,hacksaw
Pillar drill
Screwdriver
Drill 2.5,3.3,4,5,6mm
Countersink drill
Forstner bit 15mm
Side cutter
File
Bradawl
All purpose glue
Wet & dry paper
Oil
P r e m i u m - L i n e
" R e e d c o n t a c t m o t o r "
Warning!
This product contains small
parts that can be swallowed.
There is a danger of choking.
This product contains a
magnet.
Swallowed magnets can
block the intestines and
cause severe internal injury.
If a magnet is swallowed by
accident contact a doctor as
soon as possible
Please Note
The OPITEC range of
projects is not inten-
ded as play toys for
young children.They
are teaching aids for
young people learning
the skills of Craft, De-
sign and Technolo-
gy.These projects
should only be under-
taken and tested with
the guidance of a fully
qualified adult. The fi-
nished projects are not
suitable to give to
children under 3 years
old. Some parts can be
swallowed. Dan- ger of
suffocation!