WRO-100
Wireless Router
40
OPHIT CO., LTD.
According to
ETSI EN 301 489-1 V1.9.2:2011
ETSI EN 301 489-17 V2.2.1:2012
Candidate Harmonized European Standard(Telecommunication series)
Electromagnetic compatibility and Radio spectrum Matters(ERM);
Electro Magnetic Compatibility(EMC)standard for radio equipment and services;
Part 1 : Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters(ERM); Electro Magnetic Compatibility(EMC)
Standard for radio equipment; Part 17;Specific conditions for 2.4GHz wideband transmission systems,
5GHz high performance RLAN equipment and 5,8GHz Broadband data Transmitting Systems
According to
ETSI EN 300 328 V1.7.1:2006
Electromagnetic compatibility and Radio spectrum Matters(ERM);Wideband transmission systems;
Data transmission equipment operating in the 2.4GHZ ISM band and using wide band modulation techniques;
Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
The connection and disconnection of detachable parts and accessories
- Connecting power adapter and power cable to WRO-100: Plug power cable end to power adapter and
insert power adapter jack to WRO-100 DC IN socket.
- Connecting antenna: place antenna on antenna socket of WRO-100, turn clockwise to assemble and
turn counterclockwise to disassemble.
- Assembling foot rubber: Insert a screw into the hole on the foot rubber, turn clockwise to assemble and
turn counterclockwise to disassemble using screw driver.
- LAN cable: Plug your LAN cable to WRO-100 WAN or LAN port depending on your setting.
- Bracket: Only used when placing WRO-100 on a rack with DAU Rack type product. Place bracket
that’s
bended 90 degrees on the left side (where two screw holes are) of WRO-100 and assemble it by turning
the screw clockwise, and to disassemble turn screw counterclockwise, place the other bracket on the
right side of WRO-100 and use screw to assemble.
