Ophit WRO-100 User Manual Download Page 4

Page: 4 / 42

WRO-100

Wireless Router

OPHIT CO., LTD.

Safety Instructions

Please read the following safety instructions as they are designed to prevent damage to property and

harm to the user.

“Warning” Indicates the presence of a hazard that could result in severe personal injury, death

Or substantial property damage if ignored.

An exclamation mark within a triangle is intended to alert the user to the presence of important

Operating and maintenance instructions in the manual

Caution

“Caution” indicates the presence of the hazard that could result in minor injury, or property

Damage if ignored.

NOTE

“Note” describes information for the installation, operation, or maintenance of which is

Important but hazard related if ignored.

*This device is built to connect a medical device to medical facilities

router/routers or to network system for data transferring. WRO-100 can be

connected to medical devices wirelessly and also using LAN cable.

Summary of Contents for WRO-100











































Search results

Summary of Contents for WRO-100

Reviews:

Related manuals for WRO-100

Brands by name

Popular brands

Ophit WRO-100, User Manual

Search results

Summary of Contents for WRO-100

Reviews:

Related manuals for WRO-100

Brands by name

Popular brands