Ophir-Spiricon IBP-YAG Series, User Manual

Page: 3 / 25

Table of Contents
Chapter 1 General Information___________________________ 1-1
1.1 How To Use This Manual______________________________________1-1
1.2 IBP System Components ______________________________________1-1
1.3 Specifications _______________________________________________1-2
1.3.1 Operating Limits ______________________________________________ 1-2
1.3.2 Damage Limits _______________________________________________ 1-2
1.3.3 Environmental ________________________________________________ 1-2
1.3.4 Electrical Requirements ________________________________________ 1-2
1.3.5 Facilities Requirements _________________________________________ 1-2
1.3.6 Physical Dimensions ___________________________________________ 1-3
1.4 Connections and Controls _____________________________________1-4
1.5 Safety_____________________________________________________1-6
1.5.1 Precautions for safe operation ___________________________________ 1-6
Chapter 2 Setup and Operation___________________________ 2-1
2.1 Unpacking the equipment _____________________________________2-1
2.1.1 Optional Cart system __________________________________________ 2-1
2.2 Setting up the IBP-YAG _______________________________________2-1
2.2.1 Frame Grabber and Software Setup_______________________________ 2-1
2.2.2 Connections _________________________________________________ 2-1
2.3 Frame Grabber Setup ________________________________________2-2
2.3.1 Refer to your LBA-PC Operators Manual ___________________________ 2-2
2.3.2 Starting LBA-PC for the first time _________________________________ 2-2
2.3.3 Choose an initial Setup _________________________________________ 2-2
2.3.4 Verify that the system is operating. _______________________________ 2-3
2.4 Prepare the laser for collecting data _____________________________2-3
2.5 Begin data collection _________________________________________2-5
2.5.1 Troubleshooting ______________________________________________ 2-5
2.6 Taking measurements ________________________________________2-5
2.6.1 Software Settings _____________________________________________ 2-5
2.6.2 Calibration___________________________________________________ 2-6
Chapter 3 Maintenance and Storage _______________________ 3-1
3.1 Storing and transporting the IBP-YAG ___________________________3-1
3.2 Cleaning and Replacing Optics _________________________________3-1
3.2.1 Cleaning the sampling optics ____________________________________ 3-1
3.2.2 Removing and Replacing the sampling optics _______________________ 3-3
Appendix A Cooling Water Requirements ____________________ A-1
Appendix B Laser settings ________________________________ B-1
B.1 Maximum Power Settings ____________________________________ B-1
B.2 Initial IBP-YAG attenuation settings.____________________________ B-2
Appendix C Calibration Information ________________________ C-2
IBP-YAG General Information A-3