27
Instruction manual
| RX 5 T
27
12. Troubleshooting
12. Troubleshooting
Characteristic
1.|
The appliance seems to
function normally but no
medium is dispensed.
2.|
The appliance doses too much or
not enough medium
3.|
The appliance doesn' t dose
Possible cause
|
No receptacle is inserted.
|
No pump is installed.
|
Appliance is not closed
|
Pump is clogged.
|
Receptacle is empty.
|
Pump is not primed for operation or has
lost contact to the medium.
|
An unsuitable medium has been used.
|
The number of strokes has not been set
correctly
|
Batteries are empty
|
Batteries have not been inserted correctly.
Solution
|
Insert full receptacle.
|
Insert pump into the dispenser.
|
Close the appliance
|
Remove pump and clean it.
|
Replace receptacle.
|
Carry out the dosage process several
times. If it doesn’t function, the pump
is possibly clogged.
|
Use another medium.
Clean the pump thoroughly before.
|
Adjust the number of strokes.
See section 9.
|
Insert new batteries.
|
Pay attention to the polarity
If the appliance malfunctions, please remove batteries or unplug it from the mains.
If the issue cannot be resolved, please contact the manufacturer.
OPHARDT Hygiene-Technik GmbH & Co. KG
Lindenau 27 | 47661 Issum | Germany
Tel.: +49 2835 18-10 | Fax: +49 2835 18-77
www.ophardt.com | E-Mail: customer [email protected]
