OPGAL EyeCGas 2.0, User Manual

Page: 74 / 91

Defining Thermography Mode Settings
This section reviews the option to define the following thermography
mode settings when using thermography viewing mode : temperature unit,
emissivity value, reflected temperature, and color palette.
To define thermography mode settings:
1. Display the menu .
2. Navigate to the imaging modes tab.
3. Scroll to and select Thermography .
4. In the Thermography menu:
»
Select Units (A) and select Celsius , Fahrenheit , or Kelvin .
»
Select Emissivity (B) and choose the desired emissivity value
using the up and down navigation buttons .
NOTES
▪ Emissivity values are set from 0.1 to 1 by increments of .05. For more
information on emissivity value, see
Choosing Emissivity Value .
▪ Both emissivity value and color palette can also be defined using the
keypad buttons (see Choosing Emissivity Value and Selecting Color
Palette ).
Enhanced
Thermography
Celsius
Fahrenheit
Kelvin
Units
Emissivity
Tref
Palette
A
Click the right
navigation button
to make selection.
Units
Emissivity
Tref
Palette
Emissivity 0.5
Enhanced
Thermography
B
Click the right
navigation button
to make selection.
Operation | Camera Settings
74.
MENU
www.
SAFETY OVERVIEW OPERATION TECHNICAL
SPECIFICATIONS
MAINTENANCE TROUBLESHOOTING TECHNICAL
SUPPORT
EyeCGas® 2.0 | User Manual Rev 01 | Doc P/N: UM-8G9A0000B
