operabeds.com
|
0333 222 8584
|
2
DANGER
Risk assessments should be conducted prior to using the grab rail to
ensure that it is suitable for the user.
Position the grab rail at a minimum of 320mm away from the head and
footboard to avoid potential entrapment.
When operating the profiling functions of the bed, do not hold on to the
grab rail. Holding on to the grab rail whilst profiling may result in hand
entrapment and injury.
Always check that the grab rail is fully secure and ensure that the bolts
are fully tightened before use.
Regularly inspect the grab rail for signs of wear and damage on a
monthly basis. Check that the bolts are still secure.
If there is suspected fault or damage, take the grab rail out of service and
inform the person responsible.
This product is not designed to be used by children, failing to observe this
warning may result in creating hazards that can cause serious injury.
DANGER
DANGER
3. Installation
The Opera Classic Profiling Bed Grab Rail is supplied fully assembled. To install,
remove all bedding from the bed you want to attach the grab rail to. This
includes the mattress, duvet and pillows.
Loosen the thumb screws (1) on the bracket of the grab rail (A). Lift the side rail
to its highest position to allow the grab rail to fit onto the bed frame channel
(B) (as per the photo below). Move the grab rail into the desired position. This is
usually towards the head end of the bed.
Bolts loose
1
Grab rail bracket fitted onto the bed
frame
A
B
