B100P on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
11
Set card ID as previously stated if there are more than one BRI card
Insert B100P into a 3.3V or 5.0V PCI slot vertically
Plug ISDN lines into RJ-45 interfaces which set as TE mode and
ISDN phone lines into RJ-45 interface which set as NT mode.
Fix the board by a screw
Power on PC
Caution
:
If need to connect ISDN phone to B100P which
set to NT mode, the phone must have the power supply
function. During the above processes, an ESD wrist strap
is needed. Once power is on, you must not attempt to install or take down
the board. After hardware setup appropriately, it is time to install
software.
