OpenScape CP110 User Manual Download Page 98

Page: 98 / 106

Repair and recycling concept, extending performance capability

d) Reuse, recycling and recovery

Attention is paid to ease of disassembly/recycling of the OpenScape

Desk Phone waste equipment as early as the product development

stage.
Reuse:
The waste equipment is repaired and refurbished and introduced into

the spare parts cycle where it is then reused.
Recycling and recovery of OpenStage equipment that is no longer usa-

ble:
the equipment is roughly disassembled and introduced into various re-

covery operations prior to further treatment. The various metals are

separated using special shredder equipment for electronic scrap. Cop-

per and precious metals are processed by refining. Aluminum and iron

are separated and supplied for melting.

Repair reliability and spare part supply

Unify Software and Solutions GmbH & Co. KG guarantees repair sup-

port and spare part supply for up to 5 years following product discon-

tinuation of the OpenScape Desk Phone telephones.

Extending performance capability

The functionality of all OpenScape Desk Phone telephones can be ex-

tended fundamentally by means of software updates.
Please contact your administrator/system support if necessary in this

respect or your sales partner at Unify Software and Solutions GmbH

& Co. KG.

Summary of Contents for CP110











































































































Search results

Summary of Contents for CP110

Reviews:

Related manuals for CP110

Brands by name

Popular brands

OpenScape CP110, User Manual

Search results

Summary of Contents for CP110

Reviews:

Related manuals for CP110

Brands by name

Popular brands