SYSTEM SETUP
13
2.2 Advanced scan
Select [
INSTALLATION
] > [
ADVANCED SCAN
] menu to search channels manipulating TP value as
below pictures.
Satellite – select satellite to setup.
Press OK to open satellite list box or use Left/Right button.
* TIP : Left/Right button display selected satelites only for your convenience
Frequency – select TP frequency what you want to search
Symbol rate – enter correct value for TP you selected
Polarization – select either Horizontal (18V)/Vertical (13V)
Modulation – select either DVB-QPSK/DVB-S2 QPSK/DVB-S2 8PSK
Pilots – this will be enabled when you select DVB-S2 modulation
FEC – this will be enabled when you select DVB-S2 modulation
Search Option – you can select either ALL/One TP/Free Only/Network Scan
Start Search – Press OK to start searching
TP Add – enter new TP information by entering new value
TP Delete – delete current TP
PID add – Press BLUE button on RCU to perform [
CHANNEL ADD
] to add channel
in manual mode.
Help !!!
Summary of Contents for 9700 HDPVR
