OPENSAT 9700 HDPVR, User Manual, Page: 12 / 40

SYSTEM SETUP
12
2.1 Antenna Setup
Select [ INSTALLATION ] > [ ANTENNA SETUP ] menu to setup your satellite antenna with appropriate
value and search channels as below pictures.
You may need to enter PIN code to enter [
ANTENNA SETUP ]. Default PIN code is 0000 and you can
change this code in [ PARENTAL LOCK ] menu later.
‹
Satellite – select satellite to setup.
Press OK to open satellite list box or use Left/Right button.
* TIP : Left/Right button display selected satelites only for your convenience
‹
DiSEqC Port – select correct DiSEqC port number if you are using DiSEqC switch
‹
DiSEqC Uncommit – select if you are using DiSEqC 1.2 switch
‹
TP Freq – enter TP frequency for checking signal strength
‹
LNB Type – enter correct LNB type installed
‹
22KHz – select ON/OFF if you are using 22KHz switch
‹
Search Option – you can select either ALL/One TP/Free Only/Network Scan
‹
Power – select either OFF/13V/18V/Auto
‹
S/Q – signal strength / quality strength
Start Search – Press OK to start channel searching
TP Edit – Press RED button on RCU to perform [ ADVANCED SCAN ] to ADD, DELETE,
EDIT TP.
Help !!!