4–2 • DashBoard Menus
MUX-6258-A Series User Manual (Iss. 04)
Status Tabs
This section summarizes the read-only information displayed in the Status tabs. The fields in the
Status
tabs vary in severity from green (valid), yellow (caution), to red (alarm). DashBoard
reports the most severe alarm for a single field.
Signal Tab
Table 4.1
summarizes the read-only information displayed in the
Status
tabs.
Table 4.1 Status Tab Items
Tab Title
Item
Parameters
Description
General
Signal Status
OK
Indicates when the card is functioning
normally or if errors are detected
No Input
Invalid Format
Incompatible
Non-Sync Video
Group Not Present
Group Channel Silent
Audio Status
OK
Indicates the status of the audio source
AES Input Not Present
Source Missing
Source Async
AES Input Silent
Group 4 Reduced to 20bit
a
Backup Source Missing
Backup Source Async
Reference Status
OK
Indicates that a valid reference source is
present
No Ref - Video
The following conditions are occurring:
• Card reference is set to Frame 1 or
Frame 2
• A valid reference signal is not present
• Card has gone to Video Timing Mode
No Ref - Free Run
The following conditions are occurring:
• Card reference is set to Frame 1 or
Frame 2
• A valid reference signal is not present
• A valid video signal is not present
• Card has gone to Free Run Mode
Summary of Contents for MUX-6258-A-261
