CES-8940 User Manual (Iss. 02)
DashBoard Menus • 4–3
Hardware Tab
Table 4.2
summarizes the read-only information displayed in the
Hardware
tab.
Product Tab
Table 4.3
summarizes the read-only information displayed in the
Product
tab.
Table 4.2 Hardware Tab Items
Tab Title
Item
Parameters
Description
Hardware
HW Status
OK
Indicates the status of the hardware
including the rear module. Some
messages displayed are dependent on the
settings in the Alarms Enable tab.
FPGA load invalid
Incomp I/O Module
Current out of spec
Internal Error
Voltage (mV)
#
Measured input voltage
Current (mA)
#
Measured current consumption of card
CPU headroom
#
Processing power available
RAM available
#/##
On-board processing memory available
Uptime (h)
#
Displays the number of hours since the
last reboot of the card
Configuration Bank
#
Storage count
Table 4.3 Product Tab Items
Tab Title
Item
Parameters
Description
Product
Product
CES-8940
Displays the card name
Supplier
Ross Video Ltd.
Board Rev
##
Indicates the board issue
Board S/N
######
Indicates the card serial number
Rear Module
##
Indicates the Rear Module installed
Rear Module Mismatch
a
a.
Installing the card with the 8320AR-057 does not provide access to Ethernet Port 4. You must still configure these ports
in the Setup tab of DashBoard, even though they are not accessible.
Indicates the rear module is an
8320AR-057 which is not the rear module
that is supported by the card
Software Rev
##.##
Indicates the software version
