OpenEye OE2-E12004, User Manual

Page: 36 / 75

22 27717AH
MOTION/EVENT
Motion / Event Setup has four sections; Input, Sensor, Action, and EA (Emergency Agent). When and event comes in (Input) the DVR
records the image according to its settings (Camera Setup) and triggers an alarm (Action).
Input Setup
CH – Channels 1-8 / Channels 9-16
MOTION/EVENT SETUP - INPUT
SAVE CANCEL
EVENT
ON
ON
ON
ON
ON
ON
ON
ON MOTION
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL
NORMAL V-LOSS
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF TEXT-IN
ON
ON
ON
ON
ON
ON
ON
ON CH
1
2
3
4
5
6
7
8
AREA SENSOR
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
INPUT EA SENSOR ACTION
9CH-16CH
Input – On/Off [Specify whether to use event input or not.]
MOTION – Low > Normal > High > Highest [Sensitivity]
Area – Define the motion detection area.
Sensor – Associate a sensor with the camera channel.
Video Loss – Select a channel to report video loss on.
Text-In – On > Off
Sensor Setup
Sensor Setup
NO.
1
2
3
4
SIGNAL
ON
ON
ON
ON
SET CLEAR
NO.
1
2
3
4
5
6
7
8
TYPE
N/O
N/O
N/O
N/O
N/O
N/O
N/O
N/O
MOTION/EVENT SETUP - SENSOR
SAVE CANCEL
INPUT EA SENSOR ACTION
9CH-16CH
1. Use the arrow buttons to select Sensor 1 and press the ENT
key to change to N/O (Normally Open) or N/C (Normally
Closed).
2. Repeat for all sensors.
3. Select SAVE and press the ENT key to save settings and
exit Sensor Setup.
Relay Setup
1. Use the arrow buttons to select Relay 1 and press the ENT
key to turn OFF and ON.
2. Repeat for all relays.
3. Select SET and press the ENT key.
4. Select SAVE and press the ENT key to save settings exit
Sensor Setup.