OpenEye OE-GRANITE3U User Manual Download Page 82

Page: 82 / 101

Configuring

3-44

3.9.6 View Events

To view the RAID subsystem controller’s information, move the mouse cur-

sor to the main menu and click on the

System Information

link. The

Raid

Subsystem events Information screen appears.

Choose this option to view the system events information: Timer, Device,

Event type, Elapse Time and Errors. The RAID system does not built the real

time clock. The Time information is the relative time from the RAID sub-

system power on.

the message. This allows user to easily define which RAID unit is having

problem. Once this setting is done, alert by mail configuration will also work in

the same way.

SNMP Trap Notification Configurations:

Select the desired function.

After you complete the addition, tick on the

Confirm The Operation

and

click on the

Submit

button

to complete the action.

Summary of Contents for OE-GRANITE3U






































































































Search results

Summary of Contents for OE-GRANITE3U

Reviews:

Related manuals for OE-GRANITE3U

Brands by name

Popular brands

OpenEye OE-GRANITE3U, User Manual

Search results

Summary of Contents for OE-GRANITE3U

Reviews:

Related manuals for OE-GRANITE3U

Brands by name

Popular brands