manualshive.com logo in svg

OpenEye OE-GRANITE3U, User Manual, Page: 56 / 101

Share
Download
OpenEye OE-GRANITE3U User Manual Download Page 56

Configuring

3-18

Greater Two TB Volume Support:

No: still keep the volume size with max. 2TB limitation.
64bit LBA: the max. size 512TB, for Unix or Linux.
Due to LSI53C1030T does not support 16byte CDB for 64bit LBA, vendor

specific 12byte CDB is used for 64bit LBA support. The system may detect up

to two tera bytes only. A patch driver is needed to enable the system to detect

over two tera bytes. Please contact your vendor for supporting.

For Windows:  the max. size 16TB , just use with “ basic disk manager “ under

OS Window 2000, 2003 or XP. Noted that can’t be used by with dynamic disk

manager.

Tick on the 

Confirm The Operation

 and click on the 

Submit

 button in the

Quick Create screen, the raid set and volume set will start to initialize.
Note: In Quick Create your volume set is automatically configured based on the

number of disks in your system. Use the Raid Set Function and Volume Set Func-

tion if you prefer to customize your system.

Summary of Contents for OE-GRANITE3U






































































































Reviews:

No comments