33748AG
13
SETUP
The Setup menu includes System Settings, Picture Setup, and Streaming Settings.
Note
The Setup menu displays limited setup options. For a complete list of setup options, see the
Advanced
section.
SYSTEM SETTING
Camera Name
Host Name
– The Host Name is used to identify the camera on your system. If camera side Motion
Detection is enabled and is set to send alarm message by Mail/FTP, the host name entered here will
display in the alarm message.
Time zone
– Select your time zone.
Enable daylight saving time
– Manually enter daylight saving time start and stop date, time, and time
offset.
Date format
– Select your desired date format.
Sync with computer time
– Select to synchronize the camera date and time with the connected recorder.
Manual
– Manual allows you to define the date and time manually.
Sync with NTP server
–Network Time Protocol (NTP) is an alternate way to synchronize your camera’s
clock with a NTP server. Specify the server you wish to synchronize in the
NTP Server
box. Then select an
Update Interval
. For more information about NTP, visit
USER SETUP
Admin Password
Manage the password for the Administrator account.
To change the administrator password:
1.
Type a new
Administrator Password
, and then type again to confirm the password.
2.
Click
Save
.
Add User
The username and passwords are limited to 16 characters with no spaces permitted. There is a
maximum of twenty user accounts.
1.
Type the new
Username
and
Password
.
2.
Select I/O Access, Camera Control, Talk, and/or Listen as permissions for the User.
I/O Access
– All functions in the Setup and Advanced menus are available to the User.
Camera Control
– Allows the User to change camera controls in the Setup menu.
Talk
– Allow the user to speak through the camera microphone.
Listen
– Allow the user to listen to audio captured by the camera.
3.
Click
Add
.
