Enable Sabotage Detection
The Camera Sabotage Detection feature will notify users that the field of vision of a camera has been
compromised, abruptly changed, or detects significant vibration.
To enable Sabotage Detection:
1. In the Motion Detection window, click the Sabotage
Detection tab.
2. Select
Enable Sabotage Detection
.
3. Set the
Pixel Change
threshold to reduce false
alarms.
4. To activate an alarm relay on Sabotage Detection,
click Activate Relay, and then select the appropriate
relay number.
5. Select the
Beep on Detect
check box to enablethe
recorder to emit an audible beep on Sabotage
Detection.
6. Click
Apply
to save your settings.
Etc.
Additional motion detection configuration options are found on the Etc. tab. Use this tab to set a camera
channel to appear at full screen in the Display screen when a motion or sensor event is detected. You
can also set your recorder to enable motion detection even during continuous recording, or play an
audio warning when an alarm event is detected.
Set a camera channel
to be immediately
displayed full screen
Enable motion
detection during
continuous recording
Enable an audio
warning during an
alarm event
32540AB
45
Summary of Contents for E-N4U64
Page 2: ...2...
Page 13: ...RADIUS Overview 105 Connecting to a Recorder 105 32540AB 13...
