50
PTZ Function
– Assign a PTZ function (Preset, Tour, Auto Scan or Pattern) for the
camera to perform when this alarm is activated.
If Preset is selected, you will be prompted to enter a Dwell Time (1~256). This
is the time in seconds that the camera will remain at that Preset location, and
then it will return to the location that it was pointing at the time the alarm
occurred.
Refer to the sections on Presets, Tours, Auto Scans, or Patterns later in this
manual for more details.
Send Message by FTP/E-Mail
– Select to send an alarm message by FTP and/or
E-Mail when this alarm is activated.
Upload Image by FTP/E-Mail
– Select to send an image by FTP and/or E-Mail
when this alarm is activated.
Send HTTP Notification
– Select to send a notification to a HTTP server.
E-Mail, FTP, and HTTP options will also need to be configured within their
corresponding menus. See the Mail, FTP or HTTP sections previously in this
manual for more details.
File Name
Enter a file name in the box
(the examples below used “image.jpg” for the file name).
The uploaded image
’s file name format can be set in this section. Please select the one
that meets your requirements.
Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the setting is
up to
“10”, the file name will start from 00 and end at 10, and then start all over
again.
Overwrite
– The original image on the FTP site will be overwritten by the new
uploaded file with a static filename.
