16
SETUP & CONFIGURATION
CONNECTING TO THE CAMERA
1. Locate the camera on the IP Finder list.
2. Double-click the camera to open the Viewer software in your web browser.
3. Log in to the camera with the appropriate User Name and Password.
Note
The default User name is Admin and the default Password is1234. The
username and password are case sensitive
Resetting the Camera
If it is necessary to reset the camera to the factory default settings, hold down the Reset
button (see
Camera Overview
for 30 seconds. This will return all settings, including
network setup, to the factory default. The IP address of the camera will return to
192.168.0.250.
Administrator/User Privileges
The Administrator account has the authority to configure the IP camera and authorize
users’ access to the camera. The User accounts have access to the camera with limited
authority.
Lens Adjustment
The Viewer software will display an image from the camera on the Home tab. Adjust the
camera’s focus to produce a clear image.
1.
Remove the screws from the camera
dome cover.
2.
Loosen the focus fixed screw and rotate
the lens counter clockwise to adjust the
focus. Loosen the tilt fixed screw and
adjust the camera’s tilt angle.
