OpenEye CA-501J, User Manual

Page: 24 / 38

10 28563AA
Set the System Baud Rate
Press the 2 key to set the system baud rate.
Press or to change the setting (Default, 9600bps, 4800bps, 2400bps).
SYSTEM BAUD RATE
DEVICE TYPE
DEFAULT 9600 4800 2400
DOME CAMERA
(OPTIX 3)
9600 9600 4800 2400
DOME CAMERA
(PELCO-D)
2400 9600 4800 2400
DOME CAMERA
(PELCO-P)
4800 9600 4800 2400
1.10 KEY PRESS BEEP
Turn on/off the key beep. When this feature is on, the keyboard beeps each time a key is pressed.
1. Press or to change the setting.
2. Press to go to next item.
1.11 ALARM RESPONSE
Enable/Disable the alarm response function of the keyboard. The default setting is OFF.
When the alarm response is enabled:
a) A buzzer beeps and the LCD display flashes when the keyboard receives an alarm signal
b) After the alarm signal, when a user moves the joystick or presses a key, the keyboard will to link to the camera that
broadcast the alarm.
Press the or key to change the setting.
1.12 PASSWORD SETTING
Allows users to change the keyboard password. You must enter the new 4-digit password correctly twice to confirm the password
change.
LOCK KEYS
Press and hold the LOCK/UNLOCK key for three seconds to lock the keys of the keyboard and dim the LCD display. To unlock the
keys, press and hold the key again for three seconds.