![Opendesk.ch STEELFORCE PRO 370 SLS Assembly Manual Download Page 10](http://html1.mh-extra.com/html/opendesk-ch/steelforce-pro-370-sls/steelforce-pro-370-sls_assembly-manual_1639746010.webp)
10
2.10 Specific dangers
•
When adjusting the height of the frame there is danger of injury. Make sure that there is no-one
else in the immediate surroundings of the frame.
•
When assembling the workstation frame, make sure there is ample space to avoid collisions (i.e.
inclination of roof, fixed objects, filing cabinets, waste-paper bins etc.) in all imaginable directions.
•
Make sure there is ample space to avoid collisions if there are objects on the work surface such as
computers or computer peripherals.
•
Make sure there is clearance of at least 25 mm from all other furniture, all around the workstation
frame.
2.11 In an emergency
•
Stop using the workstation frame at once if you notice anything unusual (strange sounds etc.).
•
Have the workstation frame repaired by specialists. Refrain from using the workstation frame until it
has been successfully repaired.
2.12 Maintenance and upkeep
•
The workstation frame and its components are low-maintenance items and need no special regu-
lar maintenance.
•
Do not perform any repairs on the work surface or other components yourself.
•
Do not alter the construction of the work surface or its frame.
•
Any faulty components removed must be replaced with new, original components from the manu-
facturer. Use only original replacement parts made by the manufacturer. Have any such work car-
ried out by a specialist, making reference to this Assembly/operating manual.
2.13 Cleaning
•
Always unplug this workstation from the electrical outlet before cleaning.
•
Dust the workstation frame once a week with a dry cloth.
•
Clean the workstation frame with a damp cloth and a weak solution of cleaner once a fortnight.
2.14 Persistent risks
This workstation frame has been built to the state of the art and to recognized safety regulations.
Nonetheless, its use may constitute a risk to the health and safety of users or third parties, damage to
the workstation frame or to other items. The workstation frame must be used only:
•
for the purpose for which it was intended.
•
if it is completely safe to do so.
English
Summary of Contents for STEELFORCE PRO 370 SLS
