Before SW1
16
Connect the Scanner
As you can see in the following pictures, on the back of the scanner there are, from left to right, the USB port, the
power switch, the power cable port and the HDMI port:
The 3D scanner will be connected to a power supply with these specifications:
•• 1 phase+ground supply;
•• Voltage 230 V;
•• Frequency 50 Hz;
Moreover, the power line will have to be suitably protected from overloads and short-circuits coming from the mains
mounted on the wall. A line will also be supplied to ground the machine.
The sockets to be used for the machine must be able to bear the electrical intensity
required during operation.
The HDMI cable must be connected to the Computer, in the Graphic Card's HDMI port. The location of this port in
the computer may vary according to the Computer's brand and model.
This is the position of the HDMI port in the computers we provide:
Summary of Contents for NeWay
Page 1: ...User Manual 2017...
Page 20: ...Before SW1 19...