Open Date Equipment EUROCODE 150, Operator Instructions Manual, Page: 22 / 33

Eurocode (Analogue) 26/04/05 Page 21
RECOMMENDED SPARES LIST
Covering:
EUROCODE 150 / 180 / 300
MECHANICAL STOCK REF
1. Spring Set (Eurocode 150) SPR620216
or Spring Set (Eurocode 180) SPR620215
or Spring Set (Eurocode 300) SPR620217
2. Drive Belt (Eurocode 150) DRI110022
or Drive Belt (Eurocode 180) DRI620048
or Drive Belt (Eurocode 300) DRI620049
3. Drive Roller Assembly DRI620204
4. Fork End Roller Assembly FOR620208
5. Brake Strap (Eurocode 150/180) BRA620038
or Brake Strap (Eurocode 300) BRA620051
6. Grey Self Adhesive Print Base SABASE
300 x 450mm sheet
or 7. White Silicone Rubber Print Base SRBASE
300 x 300 x 3mm thick sheet
ELECTRICAL
1.
Cartridge Heater (240v) HEA501506
2. Thermistor Probe THE500502
3. Microswitch for Door SWI395011
4. Plug-In Control Card (see note below) CPC290500
5. Pack of Fuses (5) FUS393500
6. Solenoid Valve without fittings VAL510517
Note. The stock reference for the plug-in control card listed above (item 4 or 5) refers to
the 240v, horizontal (box mount) unit. Other variations are available which your printer
may have been supplied with. If in doubt, please advise the serial number of your
existing unit to our sales office.
This list covers machines supplied after 1st January 1999 for the first two years of
operation only.