15
STEP 10: PLUG IN PRO SPEAKER (IF NEEDED)
A. Plug in projector power cable into power
source. Plug in Braven speaker if battery is
not charged.
ATTENTION!
MAKE SURE YOUR BRAVEN SPEAK-
ER BATTERY IS FULLY CHARGED
BEFORE YOUR SCREENING. CHARGE
THE BATTERY BY PLUGGING THE
SPEAKER INTO A POWER SUPPLY.
IF IT’S NOT CHARGED, YOU CAN
ALWAYS PLUG IT IN, BUT TO OP-
ERATE IT WIRELESSLY YOU MUST
CHARGE IT AHEAD OF TIME
STEP 11: POWER ON ALL DEVICES
A. Power on Blu-ray player
B. Power on Braven speaker. You will hear a noise when the speaker is turned on.
C. Power on HD projector.
STEP 12: SELECT INPUT ON PROJECTOR MENU
A. Your projector is set by defaut to “In-
ternal Memory” as it’s video source. To
play the content of your Blu-Ray player,
push the menu button on the top of your
projector (bottom right hand button) and
select the HDMI option as your source, as
is pictured to the left.
For all other audiovisual devices, select
your input accordingly.
(Note: leave audio volume all the way up
on projector, otherwise projector will not
output signal through universal i/o)
POWER ON DEVICES
