23
Part No. 001077-EN, 28-m10-2019
Ceiling Lift
Portable Gantry System
Owner’s Manual
Dealer Maintenance Schedule
Perform the checks/actions listed in the Operator Maintenance Schedule as
well as those listed in the table below.
To avoid potential injury, use only
United Care
parts
when replacing parts.
To prevent the person from falling (or objects from
falling) that may cause injuries to the person, the
operator or other persons, always reinstall the track end
stops if they were removed for servicing. Note that the
recommended tightening torque is 20 N-m (15 lb-ft).
Figure 17
Inspection and Cleaning
To clean the
Gantry
, wipe down the structure with a damp cloth using warm
water and a cleaner. You can also use wipes that have a 70% v/v solution of
isopropyl alcohol.
Do not use phenol, chlorine or any other type of solvent that may damage the
finish.
Rub the
Gantry
vigorously with the cloth or wipe to ensure thorough
cleaning of the entire surface.
Dry all surfaces with a soft cloth.
Dealer Check/Action
Frequency
Perform a load test on the
Gantry
with the Safe Working Load Every year
Check for any loose hardware and tighten as needed
Every year
DANGER
