1 689 989 451
2019-07-01
|
Opel Automobile GmbH
Product description | Opel-Vauxhall-VCI | 5
en
4.3
Opel-Vauxhall-VCI Ports and cont-
rol elements
The Opel-Vauxhall-VCI has various keys and
standardized ports for operating the device and
connecting it to the vehicle electrical system and
workshop network. These connectors and cont-
rols are shown in the following illustrations.
1
2
4
3
3
5
6
7
Item Description
1
LED status display
2
Control keys
3
2x USB-A port
4
Port for diagnostic connection cable
5
USB-B port
6
WiFi Adapter
7
Ethernet Port
4.4
Universal Serial Bus (USB) Port
The Opel-Vauxhall-VCI has a fixed USB configura-
tion which cannot be changed. This ensures that
the Opel-Vauxhall-VCI can always be connect-
ed to a single computer running the software
"VCI Manager" or the user software so you can
configure LAN or WLAN settings required by your
local network. In addition, it is important to note
that a USB connection is required to configure
the firmware on the Opel-Vauxhall-VCI, to pair
the computer with the Opel-Vauxhall-VCI and to
update the firmware.
4.5
Wireless Local Area Network
(WLAN)
During setup and configuration of the WLAN
connection (802.11b/g/n), the Opel-Vauxhall-VCI
must be connected via USB to a computer run-
ning the software "VCI Manager" and be paired
with the computer.
4.6
Ethernet
During setup and configuration of the Ethernet
connection, the Opel-Vauxhall-VCI must be
connected via USB to a computer running the
software "VCI Manager" and be paired with the
computer.
4.7
Additional Opel-Vauxhall-VCI
Features
4.7.1
Data transfer
The connection between the Opel-Vauxhall-VCI
and the vehicle electronics is established via the
26-pin diagnostic connection cable.
