Opel DVD 800, Manual

Page: 57 / 80

4 - 25 Navigation
The map data can be loaded from the
DVD into the Infotainment system’s
internal memory on the Map data
add / remove menu.
The maps to be saved are selected
and marked using the multifunction
knob. The selection of the maps to be
removed from the memory must be
cleared. Delete and load maps using
the Confirm command.
The copying process may take some
time depending on the amount of
data to be copied.
The free memory is displayed in the
top line.
Route guidance is not possible at the
same time as maps are added or
removed.
The duration of the copying process
given is a rough estimate that does
not take into account any other active
functions, e.g. playing MP3 files.
If the copying process is interrupted
by switching off the system, the
copying process must be restarted
manually after the system is switched
on.
The related map material already
copied will be deleted from the
memory if the copying process is
cancelled manually. This process can
take some time.
Erase map data memory
If navigation is not possible using the
data from the internal memory, or
there is an error message on copying
map material, this command should
be used to quickly and completely
erase the internal memory
DVD800.book Page 25 Tuesday, August 26, 2008 1:51 PM