Opel CD16 BT USB, Infotainment Manual

Page: 49 / 127

Radio 49
Note
Radio stations without RDS: Only
the frequency is displayed. These
stations appear at the end of the list.
● Frequency:
Search manually or automatically
by scanning the selected range
of frequencies.
Selecting the waveband
Touch FM/AM/DR tab in top left
corner of the display to switch
between wavebands.
The station previously selected in that
waveband will be received.
Station search
Automatic station search
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Automatic station search
Briefly press
2
or
3
to search for
the next receivable station in the
current waveband.
If no station is found, automatic
searching continues until
2
or
3
is
pressed again.
NAVI 50 IntelliLink - Automatic station
search
Touch
l
or
m
to search for the next
receivable station in the current
waveband.
If no station is found, automatic
searching continues until
l
or
m
is
touched again.
NAVI 80 IntelliLink - Automatic station
search
Touch
Y
or
Z
to search for the next
receivable station in the current
waveband.
If no station is found, automatic
searching continues until
Y
or
Z
is
touched again.
Manual station search
R15 BT USB, R16 BT USB,
CD16 BT USB, CD18 BT USB -
Manual station search
Select the desired waveband then
press and hold
2
or
3
to scan the
selected waveband.
Release the button when close to the
required frequency. An automatic
search is then made for the next
receivable station and it is played
automatically.
Turn OK to change the frequency in
increments.
Stored station search
This allows you to recall radio stations
that you have previously stored.
To store a station, select the desired
waveband and station then press
station button 1...6 until an audible
signal sounds, confirming that the
station has been stored to the
appropriate station button. Six
stations per waveband can be stored.
Recalling a stored station
To recall a station, select the desired
waveband then briefly press station
button 1...6.
Search radio station name (FM only)
Select the FM waveband then
highlight the station name in the
display using
_
or
6
.