114
Answer “No”:
✔
The language of menu texts is
changed.
The prompt language remains
unchanged.
Answer “Yes”:
✔
You are prompted to insert the
language CD in the bottom CD slot of
the Infotainment System.
☞
Remove the navigation CD by pressing
the
)
button.
☞
Insert the languages CD and select the
“
Continue
” menu item.
✔
The selected prompt language is
loaded from the languages CD.
The loading can take several minutes.
G
While loading is in progress, do not
switch off the Infotainment System or
the ignition under any circumstances.
G
Do not start the engine under any
circumstances while loading is in
progress.
G
Do not press any button on the unit
while loading is in progress.
✔
After successful loading, you will be
prompted to remove the languages CD
and to re-insert the navigation CD.
Ignition lock logic
The Infotainment System is normally
switched on and off either with the
P
rotary control
1
.
When the system is switched on, it can be
switched off and on again by retracting
and/or inserting and turning the ignition
key.
This ignition lock logic is activated as a
factory setting, but can be bypassed.
Switching ignition lock logic on/off
☞
Switch the ignition lock logic on or off
by confirming the “
Ign. logic
” menu
item.
With the ignition lock logic switched
off, the Infotainment System can only
be switched on and off with the
P
rotary control.
After the system has been
disconnected from the operating
voltage (e.g. removal of the battery)
and reconnected, the ignition lock
logic is always on.
The automatic switch off is
independent of the ignition lock
logic and therefore always active.
See page 72.
Audio settings
☞
Press the
AUDIO
button to recall the
Audio menu.
☞
Press the
SETTINGS
button.
✔
The “Settings” menu for the audio
settings is displayed.
The following settings can be made:
RDS (Radio Data System)
This submenu allows you to influence the
behaviour of the radio in the FM
waveband. More information on the
subject of RDS can be found in the “Radio
Data System” section, “Radio” chapter on
page 84.
☞
If you activate “On” the radio
evaluates the Radio Data System.
☞
If you activate “Automatic” the radio
automatically switches on RDS for all
RDS stations, even if RDS is not
activated.
