44
3. Ensure you have a data activated and credit on your SIM
Card.
4. Your network signal may be weak or out of range. Contact
your network provider or try the SafetyPendant in a different
location to check your signal.
5. After the Pendant is switched on, press the power button once
to check the device status. 1 x LED means connected to the
network; 3 x LED means no connection to the network.
6. Ensure no SIM PIN is setup on the SIM card.
7. Disable whitelist within the app.
Cannot receive calls
1. Ensure your SafetyPendant is switched on.
2. Ensure you have enough signal strength to receive calls.
3. Ensure your SIM card is installed correctly.
SafetyPendant won’t charge
1. Ensure the power plug is inserted in the wall socket correctly
and the wall switch is turned on.
2. Ensure the wall power socket is working by testing another
device or a separate power socket.
3. Ensure you have inserted the micro-USB cord into the
charging cradle.
4. Ensure you have left the SafetyPendant on charge for at least
3hrs as the battery may have run out of charge completely.
Summary of Contents for SafetyPendant
