H. Q&A
F. Maintenance
G. Troubleshooting
Checkpoints / Solution
Make sure all power cables are connected.
Power button is ON.
Make sure LED status is ON
If it is on HI or LOW mode, the lamp has off time, during 24-hour cycle.
Pump may make a buzzing sound in the beginning due to air inside the pump. After a minute with
water running through the pump, this sould be reduced.
Control Box is designed with Auto, HI and LOW modes, which turn the lamps and the pump on and off
periodically. It simulates an outdoor daily cycle to offer the best growing condition
Rotate the ring at the end of the pump clockwise or counterclockwise to get the most suitable water flow
Make sure it is not clogged at the water flowing gateway on each planting layer
Issue
Lamps not
lighting up
Pump has a
buzzing sound
The lamp/ pump
stop after hours
Water Over flows
Answer
During the abnormal delivery in vessels, aircraft, or other vehicles, it may lead to damages in GrowWall
(OFG003)/GrowWall2(OFG003-2) and creates leaking problem. OPCOM FARM provides waterproof tape
for you fix it in case damage happened.
You can move the partition to change the size of the pot for your planting.
Question
Product leakage When it works.
How to use planting partition?
Quick Guide Manual
F1. Add Water
1. Measure the pH/EC value every 1-2 weeks and add water to maintain the vlaue balance
Ver.: 180322
GrowWall2
Hydroponics Green Wall
E. Optional Accessories
Day 7-10
D. Sprouts and Microgreens.
Day 0
Day 1
1. Before you start next seedling, take advantage of the seedling tray for sprouts and microgreens it takes 7-10 days to harvest.
2. Put seeds in warm water(recommeded temperature is 35 , not over 40 ) for 24 hours.
3. Cover the sponges with wet paper towels.
4. Place the seedling tray with cover in the shade or cover it with black cloth.
5. After germination, during the growing stage, keep green sprout under the light and white sprout in the shade or cover it
with black cloth; Around 7-10 days, you can harvest.
F2. Change Water
1. After a cycle of planting, change the water and clean the unit
2 When change water, clean water gateway on each planting layers, you may also add moss detergent in the water tank to avoid the moss remaining
3. On the regular basis of every 1-2 weeks, clean the filtering sponge in the pump
3. Pod Stick : 3x30PK
4. Black Cloth Cover
5. 500W Water Auto Heater
2. OPCOM Wave Clip
1. Keep the electrode clean of EC/pH meter and cover the electrode protective cap when not in use.
2. Turn off the meter when not in use for an extended amount of time.
F3. EC / pH Meter Use and Calibration
Green sprout
White sprout
1. OPCOM Link Box
www.opcomfarm.com
For more information, please visit
F1708038
P17103002
P17092804
F1709051
PATENT
Intertek
US
C
CM
LTSTED
4010499
