7
Owner’s guide
Rev. 2.3
5.
Using the speaker terminals
In the Opalum product range there are two types of speaker terminals present:
•
Push type terminals
•
Screw type terminals
Push terminal
Screw terminal
5.1 Installing speaker cable in push type terminals
1
.
Push terminal firmly until cable hole is fully open
.
2
.
Insert metal part of speaker cable into the cable hole. Make sure that there is no cable
insulation inside the hole.
3
.
Release pressure from speaker terminal. Make sure cable is securely fastened.
5.2 Installing speaker cable in screw type terminals
1.
Turn terminal nut counter clockwise until cable hole opens as shown in figure 5
.
2
.
Insert metal part of speaker cable into the cable hole. Make sure that there is no plastic cable
insulation inside the hole.
3
.
Turn terminal nut clockwise firmly until cable is securely fastened.
