OontZ Angle 3 BudZ will not power on
- The battery may have become fully drained. Charge the battery using the Micro USB Charging
Cable by inserting the larger end of the Micro USB Charging Cable into a USB wall charger for a
Smartphone or iPhone, or a USB port on your laptop/computer to charge the OontZ Angle 3 BudZ
battery. Please see instructions on Page 7 and 8.
I am having trouble pairing and connecting with my mobile device
- Your mobile device may be out of range and you will hear a double beep every 15 seconds.
Move back within 30 unobstructed feet of your mobile device. The OontZ Angle 3 BudZ will
reconnect, there will be a voice prompt ‘connected’. Press the button to start playing again.
- Check that your OontZ Angle 3 BudZ have a sufficient battery charge, the Headphones may not
connect when the battery has a low charge. Connect the OontZ Angle 3 BudZ to a charging
source and try again to pair and connect.
- Check the LED light to make sure it is flashing Blue rapidly. If the LED is flashing blue 3 times every
5 seconds the Headphones are already connected to another mobile device. The OontZ Angle 3
BudZ can be connected to one device at a time. You need to disconnect the connected device,
then you can connect to the next device. Please see instructions on page 9.
- Your mobile device may have a temporary Bluetooth connection issue. Please try the following
steps which can help resolve this.
For iPhone, iPad and iPod
- Turn off the OontZ Angle 3 BudZ, go to the Bluetooth device list on your iPhone, iPad or iPod
and check if the OontZ Angle 3 BudZ are listed. If it is listed press the icon next to the OontZ
Angle 3 BudZ and then select ‘forget this device’. With the OontZ Angle 3 BudZ removed from
the list or if it was not listed, do a hard reset on your iPhone, iPad or iPod by pressing and
holding down the Home and sleep buttons at the same time for about 10 seconds until the
Apple icon appears and it restarts. When it restarts, turn on the OontZ Angle 3 BudZ and then
try again to pair and connect.
Troubleshooting
15