4 |
P a g e
Safety & Warranty
1.
WARNING: To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
2.
WARNING: Do not modify this equipment without authorization of the
manufacturer.
3.
Read these safety instructions carefully.
4.
Keep this user's manual for later reference.
5.
Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.
6.
For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
7.
Keep this equipment away from humidity.
8.
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
9.
The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
10.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
11.
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
12.
All cautions and warnings on the equipment should be noted.
13.
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
14.
Never pour any liquid into an opening. This could cause fire or electrical shock.
15.
Never open the equipment. For safety reasons, only qualified Service personnel
should open the equipment.
16.
If any of the following situations arises, get the equipment checked by service
personnel:
a.
The power cord or plug is damaged.
b.
Liquid has penetrated into the equipment.
c.
The equipment has been exposed to moisture.
d.
The equipment does not work well, or you cannot get it to work according
to the user manual.
e.
The equipment has been dropped and damaged.
f.
The equipment has obvious signs of breakage.
