Connections
1.
2.
3.
Connect the power cable to the power cable connector on the rear of the
display unit.
Connect the signal cable to connector on the rear of the display unit.
Run a ground wire (local supply) between the ground terminal on the rear
of the display unit and the ship's superstructure.
Navigation aid, video sounder connection
If your navigation aid can output data in
data format, your
vessel
IEC61162(NMEA0183)
's position in latitude and longitude, the range and bearing to waypoint,
speed and course may be input to this radar, and be seen on the screen.
Further if your video sounder can output depth in IEC 61162(NMEA 0183) data
format, depth can be displayed on the radar screen.
2. NMEA (6 pins connector)
3. VCA
Now not used
4. UPGRAPE: Upgrade interface, you need to use special upgrade cable .
5. RS-422:
1. NMEA1 (5 pins connector)
53
2
3
4
5
2
3
4
5
1
1
6
PIN No.
Function
1
2
3
4
5
GND
3.3V
NMEA1 Input+
NMEA1 Input-
Not used
PIN No.
Function
1
2
3
4
5
NMEA2+
GND
6
+12V
PIN No.
Function
1
2
3
4
5
GND
OUTPUT-
INPUT-
INPUT+
6
7
8
+12V
GND
+12V
NMEA2-
NMEA3+
NMEA3-
1
2
3
4
5
6
7
8
