OnTruss Prinz Gewerbepark - Halle 78 Bozener Str. 1 86165 Augsburg / GERMANY
23 von 27
Insert the tool in the middle of the board transition and slide it along the bottom side of the EventBoard.
The tool is correctly placed when the labelling is readable. The BoardBinder is unlocked when the “OPEN”
line is reached. Now you are ready to shift the BoardBinder.
STEP 4
Remove all corners.
STEP 5
Then you can remove all straight plates from the truss. To ensure that you can enjoy our product for a long
time, please only remove the boards using one of these methods.
STEP 5a – Possibility 1
Move the straight board by a short way on the truss until the GripSlats on one side are completely freed
from the groove. Now twist the board upwards in such a way that a truss tube forms the rotation axis. Now
the TrussClips are removed from the first truss pipe. Afterwards you can completely lift the board away.
STEP 5b – Possibility 2
Lift the plate slightly at the open end. This will release the outer TrussClips from the pipe. Now shift the
EventBoard simultaneously along the truss. Once the groove on either side is free, you can increase the
angle upwards until the EventBoard is completely detached from the truss.
If you cannot get EventBoard off the truss, probably a TrussClip Safety is attached! Please
check this before you use excessive force. Otherwise the EventBoard can be damaged.
