Ontech GSM Mini 9009, User Manual

Page: 13 / 36

-13-
When an alarm is activated
When an alarm is activated an SMS will be sent to all contacts on the send list. How
you create this list, see page 6.
Interpreting the SMS
The SMS that will be sent has the following lines and is interpreted as follows::
Example Explanation
*Ontech9009 A star (*) means that the alarm function is turned on.
Alarm:
1ab, 3b Indicates all alarms that have been activated since the last
acknowledge. The number indicates the unit, Ontech 9009 is
always no 1, and the others refer to the slave units connected.
See page 20.
Note that these inputs not can send an alarm again before the
alarm has been acknowledged.
Inputs:
1b Indicates the alarm input that still is activated. In this example
the SMS means that inputs 1a, 1b and 3b has been activated
since the last acknowledge and that input 3b still is activated.
Units:
1*,3,4* Indicates the units communicating with the master unit. Unit
number 1 is always the master unit. The other numbers refers
to the slave units connected. A star (*) after the number
indicates that the relay is turned on.
If the master looses contact with one of the slaves unit its ID
number will not be shown in the SMS.
Alarmrelay on Indicates that the ALARMRELAY function is activated.
Temp watch on Indicates that the Temperature guard function is activated.
Temp:24 Gives the temperature at the master unit in degrees Celsius.
Acknowledge an alarm
When an alarm input is activated the unit will not be able to send a new alarm
before the earlier alarm is acknowledged.