10
Turn-by-Turn Navigation
Making a Wrong Turn or Making Stops During a Planned Route
An announcement like,
“You have left the planned route. Directions will resume
automatically when you return to the route. Do you need updated directions? Please
say YES or NO. Or, you can say CANCEL ROUTE”
will be given if the vehicle makes a
wrong turn or stops during a planned route.
• Say “No” if the stop or change is temporary.
• Say “Yes” if a turn has been missed. The system will then automatically calculate
a new route.
• Say “Cancel route” if the directions are no longer needed.
Arriving at Your Destination
An announcement like
“Your destination is ahead,”
or
“1234 Miller Road is on your right”
will be given and the
directions will automatically end.
Occasionally, the exact destination address will not be
reached and the driving directions will continue when the
vehicle leaves the destination. Push the
button and
say “Cancel route” to clear the stored route and end
Turn-by-Turn Navigation.
Turn-by-Turn Navigation Commands
Voice commands can be used to obtain information
about an active route.
1. Push the
button. This will activate voice
recognition.
2. When the system responds with
“OnStar ready” and
the talk-tone, say the desired voice command below.
Voice Commands:
To activate a voice command, push the
button.
When the system responds with
“OnStar ready” and
the talk-tone, say the voice command.
•
“Cancel Route”
- to cancel the current route.
•
“Repeat”
- to hear the last maneuver given.
•
“Mute Directions”
- to mute and un-mute the directions.
•
“Route Preview”
- to hear all the maneuvers. All
maneuvers will play in sets of three.
•
“Update Route”
- to recalculate directions.
NOTE:
If the system
recognizes a missed
turn or the vehicle
deviates from the
planned route, the
message, “You have
left the planned
route” will play
and the system will
automatically unmute.
