InTemp CX Temperature Logger (CX40x) Manual
1-800-LOGGERS 2
www.onsetcomp.com
Specifications (continued)
LCD
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or
go blank in temperatures outside this range
Dimensions
9.4 x 4.5 x 2.59 cm (3.7 x 1.77 x 1.02 inches)
Weight
90.2 g (3.18 oz)
Environmental Rating
IP54
The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).
See last page
Logger Components and Operation
Start Button:
Press this button for 1 second to start the logger
when it is configured to start “on button push” (see
Configuring
the Logger
).
Mute or Next Button:
Press this button for 1 second to mute a
beeping alarm (see
Logger Alarms
). For CX402 loggers, press
this button for 1 second to switch between the external probe
and ambient internal sensor temperature readings.
Magnets:
There are four magnets on the back of the logger (not
shown in diagram) for mounting.
Temperature Sensor:
This internal sensor measures ambient
temperature.
External Temperature Probe:
This is the probe that is plugged
into the logger for measuring temperature (CX402 models
only).
Audible Alarm Speaker:
This is the speaker for the audible
alarm that beeps when an alarm is tripped or the external
probe is removed (if applicable).
Alarm LED:
This LED blinks every 5 seconds when an alarm is
tripped or the external probe is removed (if applicable). See
Logger Alarms
.
LCD
: This screen shows the latest temperature reading and
other status information. The LCD screen refreshes at the same
rate as the logging interval. The example shows all symbols
illuminated on the LCD screen followed by a table with
descriptions of each symbol.
LCD Symbol
Description
An alarm has tripped because the temperature
reading is outside the specified range
The logger has been configured to perform daily or
twice daily checks (twice daily is shown in this
example), but no checks have been performed yet.
The once daily or twice daily logger check (twice in
this example) has been performed.
This indicates how much memory has been used
for the current deployment. In this example,
approximately 40 percent of the memory has been
used.
The shows the approximate battery power
remaining.
The logger is currently logging.
The logger is currently connected to a phone or
tablet via BlueTooth. The more bars there are, the
stronger the signal.
The logger is waiting to be started. Press and hold
the Start button for 3 seconds to start the logger.
This is an example of a temperature reading from
an external probe.
This is an example of a temperature reading from
the internal sensor.
This is an example of a minimum temperature,
which is the lowest probe temperature reading
from the day (CX402 models) or the lowest
ambient temperature reading (CX403 model).
This is an example of a maximum temperature,
which is the highest probe temperature reading
from the day (CX402 models) or the lowest
ambient temperature reading (CX403 model).
and
The external probe is not connected to the logger
(if applicable).
External
temperature
probe (CX402
models only)
LCD
Alarm LED
Start button
Audible alarm
speaker
One of four
magnets (on
back of logger)
Temperature
sensor (behind
rectangular
plug)
Mute or Next
button
