Onlogic Factor 202, Product Manual

Page: 20 / 39

system. The default configuration is included below, but the behavior can be customized using the
CM4 boot configuration file.
PoE PD (power input) support is available optionally by adding the ADP122 FR200 POE PD module to
the system. Note: DC power input should not be connected when the system is supplied with POE
power via the ADP122 add-on module.
Speed/Act
State
Speed
State
Function
Off Off
LAN link is not
established
Green
(Flash for
Activity)
Off
10 Mb/s data
rate
Green
(Flash for
Activity)
Orange
100 Mb/s data
rate
Off
Orange
(Slow
Blink)
1000 Mb/s data
rate
LAN activity light description
LAN2 - Realtek RTL8153B
The second LAN Port on FR201 supports up to 1Gbps link speeds over standard shielded CAT5e or
CAT6 cables. The connector is the industry standard RJ45 connector. The LAN link state is shown by
the two LEDs enclosed in the port. The description is included below. Activity is also indicated by the
LAN2 LED on the side of the system.
Speed/Act
State
Speed/Act
State
Function
Off Off
LAN link is not
established
Green
(Flash off
for
Activity)
Green
(Flash on
for activity)
/
Orange
10 Mb/s data
rate
Green
(Flash on
for
Activity)
Green
(Flash on
for Activity)
/ Orange
100 Mb/s data
rate
Green
(Flash off
Green
(Flash on
1000 Mb/s data
rate
20