ONLINE ELECTRONICS LTD
ID5000P_5001_A01
Page 7 of 18
3.2.
TURN ON SEQUENCE
To turn the unit on simply press and hold the
control button until the COMPANY LOGO appears on
the display and then release, this takes
approximately 5 seconds.
The next screen shows the PRODUCT LOGO and
firmware version at the bottom of the screen in Vxx
format. This screen will be displayed for 5 seconds
as shown by the COUNTDOWN INDICATOR at the
bottom left corner of the display.
When the COUNTDOWN INDICATOR reaches zero,
or the control button is pressed, the next screen will
appear.
The next screen shows the time and date currently
set in the unit. This can be changed if required. See
Section 3.7.8 SET TIME/DATE for more information.
The next screen is the STATUS screen. This screen
shows the current configuration of several settings.
See section 3.7.2 STATUS for more information.
The unit now enters STABILISATION. During
STABILISATION the unit will not detect or log any
magnetic events. When the COUNTDOWN reaches
zero or the control button is pressed the unit will
enter LISTENING MODE.
The final screen shows the unit in LISTENING
MODE. The 8 LEDs will flash once every five seconds
while the unit waits for a pig passage. See Section
3.3 LISTENING MODE for more information.
