11
Troubleshooting Supplementary Information, etc.
|
2. Speaker
You can make changes to the connection environment of the speakers and change the
volume level. Settings are automatically configured if you use AccuEQ Room Calibration.
This setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
■
1. Configuration
Setting Item
Default Value
Setting Details
Speaker
Channels
7.1 ch
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1
ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or
"5.1.2 ch" to suit the number of speaker channels
connected.
Subwoofer
Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Height Speaker
Top Middle
Set the speaker type if height speakers are
connected to the SURROUND BACK or HEIGHT
terminals.
Select "Front High", "Top Front", "Top Middle", "Top
Rear", "Rear High", "Dolby Speaker (Front)", or
"Dolby Speaker (Surr)" according to the type and
layout of the connected speakers.
•
If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.
Zone Speaker
No
Set the connection of speakers to Zone 2 speaker
terminals.
"Zone 2": When speakers are connected to Zone
2A speaker terminals
"Zone 2A+B": When speakers are connected to
Zone 2A and Zone 2B speaker terminals
•
This setting cannot be selected when surround
back speakers or height speakers are installed.
"No": When speakers are not connected to Zone 2
speaker terminals
Setting Item
Default Value
Setting Details
Bi-Amp
No
Set whether the front speakers are bi-amp
connected.
"No": When front speakers are not bi-amp
connected
"Yes": When front speakers are bi-amp connected
•
This item will be fixed to "No" when anything
other than "No" is selected for the "Zone
Speaker".
•
This setting cannot be selected when surround
back speakers or height speakers are installed.
Speaker
Impedance
6ohms
Set the impedance (
Ω
) of the connected speakers.
"4ohms": When any of the connected speakers
have 4
Ω
or more to less than 6
Ω
impedance
"6ohms": When the connected speakers all have
6
Ω
or more impedance.
•
For impedance, check the indications on the
back of the speakers or their instruction manual.